Best Gaming PC Cases | Best Cheap And Affordable | 2021

Are you looking for best pc Gaming Cases  One of the basic elements needed in every PC is a box – also called a cabinet in America – in which to put all the components. They come in different shapes and sizes, and generally the more unique the design, the stronger and easier the components are to assemble, the more expensive it will be. This article will help you in the choice, giving examples of different price ranges, but all the boxes are very good in terms of quality-price.

Top and Best Gaming Cases

Note: if you see something wrong in this article, it is not clear or you disagree, please indicate it in the comments and help us improve it. Try to maintain a positive and collaborative attitude, that the world is already full of people with negative and destructive attitudes. Speaking people understand, and it is always possible that you draw conclusions far from what you want to convey with the article.

How to choose the box size

There are different sizes of computer case that, although not everyone calls them by the same name, they could be classified as follows:

  • Towers, semi-towers, and mini-towers. They are the classic models, although the mid-tower is the one that is usually bought more commonly since it has a large number of expansion slots for disks and they have a wide interior for all kinds of components – such as large fans and high-end cards or enthusiasts who tend to be especially large . They are usually compatible with both motherboard formats up to ATX. The mini-towers accept mini-iTX and micro-ATX motherboards, and the towers are for those who need the best possible cooling equipment or for large motherboards like E-ATX.
  • Slim or slim format. Few expansion possibilities, they usually have a 5.25-inch bay for a DVD player and one or two 3.5-inch holes for discs. In these cases it is necessary to resort to the graphical capacities integrated in the processor of the system. They are designed to include a Micro ATX or Mini ITX board and little else – you can see our article on best motherboards  .
  • Desktop. It is the typical box that takes up more space horizontally and considerably less vertically, and that in many work centers they put the monitor on top. Medium expansion capabilities, but personally I have never liked them. They are a direct inheritance from the early IBM and Apple PC designs.
  • Cubes They’re one notch below the mini-towers, and typically allow front access to a 5.25-inch drive and a 3.5-inch drive – DVD and a card reader, for example . Their interior is fairly compact, with little expectation of a good ventilation system, but at least they typically feature multiple 3.5-inch bays.
  • HTPC. The long name is personal computer for home theater ( home theater personnal computer ) and, although they were designed for multimedia centers for the living room, the truth is that with the current power of the processors and integrated graphics nothing prohibits them from being used like ours main team. Really compact and taking up little space.

There is also a special type of box that is barebón that includes a plate and power supply inside, so they are practically ready to use. You just have to put RAM, CPU, GPU and a disk. This often gives barebones makers more control over the internal arrangement of items, so they end up being more compact than cubes.

Some recommendations for choosing best gaming Pc Cases

  • In no case do you leave the box boxed . It is the easiest way for the power supply, the processor fan or the processor itself to stop working due to overheating. Especially the source, which is the most sensitive component in this regard, especially if it is cheap and lacks protection systems that include expensive sources  cheap is often expensive .
  • Don’t trust the photos , especially in cheap boxes. Many times you will see in them that the box has fans of a certain color, or that lights come out of the box, and sometimes it is not. If it has caught your attention as to be the reason you bought it, make sure it really includes it. In the most expensive boxes you don’t have so much to worry about because the photos are usually a true reflection of what they include.
  • If you want to overclock , you live in a warm area or you simply want your PC to not pass heat, you are going to need boxes with multiple points to place fans, or that you can easily attach a liquid cooling system. The front and bottom fans should be positioned to draw air into the box, and the rear and top fans to remove it. They should also have dust filters in which they introduce air. Prepare to leave 100 euros or more in those boxes, because you are going to need it. You can learn more about case cooling in the PC cooling article .
  • Periodically clean the inside of the box . Dust is usually concentrated on the fans that must cool the computer, in addition to those that cool the CPU and graphics card. The dust makes them move less volume of air, and therefore they do their job worse. If you hear a lot of noise or notice that the temperatures have risen in the box, this is a more than likely reason if you haven’t cleaned it for more than six months.
  • To connect multiple fans and have them monitored you will need several 3 and 4-pin connectors on the board. Make sure that the plate you want to buy includes them. If not, you will have to connect them directly to the power supply. Those that have a potentiometer will have to be hooked to a 4-pin connection to be able to be automatically regulated by the equipment.
  • The boxes have cable management zones on the back of the motherboard. In them there are also, normally, points to fasten the cables with ties so that they are more organized.
  • Generally the boxes are sold with some type of dust filter for, at least, the air inlet area of ​​the power supply. In boxes starting at 50 or 60 euros, you are already beginning to see dust filters that are magnetically attached, which simplifies their removal for cleaning and their subsequent repositioning. Various models also use these filters in the upper area if they have upper fan installation areas.
  • Also make sure that, if the box has four USB 3.0 ports on the front for example, the motherboard has two USB 3.0 headers.
  • If a box includes a power supply and they sell it to you cheap, it is highly likely that it is of poor quality. Make sure you check out our Power Supplies article .
  • Boxes are still being sold to locate the fountain on top. Although it is a practice that formerly led, due to ignorance and poor air flow, to a greater overheating of the source that was used to extract heat from the interior, today with low consumption equipment (office automation) it does not matter too much the location of the source. Even so, it is preferable that the source is located at the bottom, as is the case in the vast majority of boxes over 30 euros.

NOX Modus

The Modus is a model for those who don’t want to spend a lot on a box and want to build a normal gaming rig with no special requirements – like an i5 and a GTX 1050 Ti / RX 570, for example . Unlike other boxes in this price range, it has a side window in case you opt for a heatsink with lighting, or you want to tune the inside of the box a little more.

It includes as standard a 120 mm front fan – to choose from without color, or red, green or blue – and you can put another 80 mm rear fan . It has two 5.25-inch bays, three 3.5-inch internal, and another 2.5-inch. It has two USB 2.0 and another front USB 3.0, in addition to the audio connectors.

NOX Coolbay MX2

The Coolbay MX2 box is an economical one with a size of 198 x 396 x 400 mm, being able to install micro-ATX boards in it. It is a box with limited ventilation options, with space for one front, one rear and one side, and it includes the 120 mm front fan as standard, with enough space for radiators. It is a box with a discreet design in black, and somewhat smaller than normal in a mid-tower.

The interior has space for two 3.5-inch drives, two 2.5-inch drives, and an external 5.25-inch bay. On one side there is a micro-SD and SD reader, and the connectors are in the upper part of the front, with two USB 2.0, another USB 3.0 and 3.5 mm audio connectors. Supports heatsinks up to 160mm high and graphics cards up to 350mm in length.

Matrexx 30 by Deepcool

This case is for motherboards up to micro-ATX, has a small mid-tower size of 405.8mm × 193mm × 378.2mm, and has a pre-installed 120mm fan. Includes 5.25-inch, two 3.5-inch, and four 2.5-inch drive bays. It has a pair of USB 2.0 connectors and a USB 3.0.

Cylon Mini by Aerocool

The Aerocool Cylon Mini is a box with RGB lighting and side panel that, being also economical and small, can be used for those who do not want a mini-PC but also do not want a mid tower. This stays in a mini-tower, with only a couple of room for fans – one of them 80mm included – and with enough options for storage positions. You have to take into account the 147 mm maximum height of the heatsink if you are going to buy one.

Kore by NOX

The Kore is an inexpensive case, with enough space for full ATX motherboard kits, but it is sold without fans. For basic, low-consumption equipment such as those that are simply for office automation, it will not need their inclusion due to their low consumption – perhaps it consumes over 50-60 W in load – and if you opt for a heatsink with a fan, this The latter will already move the air inside the box enough not to need it. But if you want to include a dedicated graphics card, it would be advisable to include one or two fans, depending on the cases

NOX Hummer ZS

The Hummer ZS is an economical box for equipment that does not have special cooling requirements. The fountain and storage area is included in its own compartment and separated from the rest of the components. A fan can be installed at the bottom. On one of the sides it has two switches to control the speed of up to four fans along with an SD and microSD card reader

At the top of the front you have the USB, headphone and microphone ports. The box includes a rear fan and a front fan, and is made of steel and plastic components. It has two bays for 5.25 ” drives, two for 3.5 ” and two for 2.5 ”. It has a side window and space on the right side for cable management.

BitFenix ​​Nova TG

The Nova TG , being a box in which the whole interior will be seen and not part, have changed the area of ​​the units so that they can be seen from the outside, and the air intake area on the sides of the front is red . It includes a 5.25-inch bay, space for three 2.5-inch and three 3.5-inch drives.

It has two positions for 120 mm fans on the front and one on the rear, which is pre-installed and has LED lighting. Heatsinks up to 160mm high and graphics cards up to 280mm can be installed in this box.

At the top of the front there are two USB 3.0 ports, two 3.5mm audio jacks, and the power and reset button. ATX, micro-ATX and mini-ITX boards can be installed, and in addition to having air filters, the rear fan area is also adapted to install a 120 mm radiator.

Add a Comment

Your email address will not be published. Required fields are marked *